Ro Membrane can remove many types of molecules and ions bigger than 0.0001um from solutions, and allow smaller components of the solution (typically water) to pass freely. One of its common applications is seawater desalination, in which pure water is produced from a highly saline feed stream. Membrane material: Polyamide; Special composite membrane.
We supply reverse osmosis membrane elements with standard, low and extra low pressure for water treatment as well as for sea water purification by using high quality imported Ro Membrane sheet. The feed channel height can be varied by the thickness of the feed spacer material (from 13 to 120 mil). This helps to adapt the viscosity or the solids content of the liquid. This design feature leads to excellent hydrodynamics in combination with low energy demand. To meet some specialty applications, high sanitary, fouling resistant or high temperature membrane products are available.
Ro Membrane Advantages
> High flux, low energy consumption and long life
> Imported high quality raw material
> Simple and economic module replacement
> Various choices of module dimensions
Ro Membrane APPLICATION
> Desalting of various liquid
> Ultrapure water production in Pharmaceutical, biotech industry
> Whey concentration in dairy industry
> Boiler feed water at power stations
> Home & commercial drinking machine
Ro Membrane Parametric Specification Table
|
Ro Membrane
|
Rejection(%)
|
Flux rate(LMH)
|
Replacement reference
|
Typical applications
|
|
RO1
|
99.5
|
45
|
BW30
|
Water treatment;
Specific liquid concentration;
Sea water desalination;
Landfill leachate;
Watsewater treatment,etc.
|
|
RO2
|
99.2
|
55
|
LE
|
|
RO3
|
99.0
|
50
|
XLE
|
|
RO4
|
99.4
|
42
|
SW30
|
|
RO5
|
99.7
|
47
|
SW30ULE
|
|
RO6
|
99.7
|
30
|
SW30HR
|
Testing condition: RO1:2000ppm NaCl, 225psi(1.55MPa), 25℃;
RO2: 2000ppm NaCl, 150psi(1.03MPa), 25℃; RO3: 500ppm NaCl, 100psi(0.69MPa), 25℃;
RO4, RO5, RO6: 32000ppm NaCl, 800psi(5.5MPa), 25℃
